AEC_Q100_Rev_G_Base_Document(6)

车用电子产品的执行标准。

AEC - Q100 - REV-G

May 14, 2007

Automotive Electronics Council

Component Technical Committee

2.2

Precedence of Requirements

In the event of conflict in the requirements of this standard and those of any other documents, the following order of precedence applies: a. b. c. d. e.

The purchase order

The individual device specification This document

The reference documents in section 1.2 of this document The supplier's data sheet

For the device to be considered a qualified part per this specification, the purchase order and/or the individual device specification cannot waive or detract from the requirements of this document.

2.3

2.3.1

Use of Generic Data to Satisfy Qualification and Requalification Requirements Definition of Generic Data

The use of generic data to simplify the qualification process is strongly encouraged. Generic data can be submitted to the user as soon as it becomes available to determine the need for any additional testing. To be considered, the generic data must be based on a matrix of specific requirements associated with each characteristic of the device and manufacturing process as shown in Table 3 and Appendix 1. If the generic data contains any failures, the data is not usable as generic data unless the supplier has documented and implemented corrective action or containment for the failure condition that is acceptable to the user.

Appendix 1 defines the criteria by which components are grouped into a qualification family for the purpose of considering the data from all family members to be equal and generically acceptable for the qualification of the device in question. For each stress test, two or more qualification families can be combined if the reasoning is technically sound (i.e., supported by data).

Page 3 of 32