M393T6453FZ3-CC中文资料(14)
发布时间:2021-06-06
发布时间:2021-06-06
元器件交易网
256MB, 512MB Registered DIMMs
Parameter
DQS input low pulse widthDQS falling edge to CK setup time
DQS falling edge hold time from CK
DDR2 SDRAM
DDR2-533min
0.350.20.220.40.353752500.90.47.51037.5502
Symbol
tDQSLtDSStDSHtMRDtWPSTtWPREtIHtIStRPREtRPST
DDR2-667min
0.350.20.220.40.352752000.90.47.51037.550215tWR+tRP
7.57.5tRFC + 10200226 - AL32tAC(min)tAC(min)+2
2.5tAC(min)tAC(min)+2
380tIS+tCK +tIH
122tAC(max)+0.72tCK+tAC(ma
x)+1
2.5tAC(max)+
0.62.5tCK+tAC(max)+1
xxxxx
DDR2-400min
0.350.20.220.40.354753500.90.47.51037.5502
xxx
15tWR+tRP
107.5tRFC + 10200
xx
226 - AL
xxxxx
UnitsNotes
xxxx0.6xxx1.10.6xx
tCKtCKtCKtCKtCKtCKpspstCKtCKnsnsnsnstCKnstCKnsnsnstCKtCKtCKtCKtCK
2
tCKnsnstCKnsnstCKtCK
12
nsns
max
xxxx0.6xxx1.10.6xx
max
xxxx0.6xxx1.10.6xx
max
Mode register set command cycle timeWrite postambleWrite preamble
Address and control input hold time
Address and control input setup timeRead preambleRead postamble
Active to active command period for 1KB page
tRRD
size products
Active to active command period for 2KB page
tRRD
size products
Four Activate Window for 1KB page size products
Four Activate Window for 2KB page size products
CAS to CAS command delayWrite recovery time
tFAWtFAWtCCDtWR
15tWR+tRP7.57.5tRFC + 10200226 - AL
Auto precharge write recovery + precharge timetDALInternal write to read command delayInternal read to precharge command delayExit self refresh to a non-read commandExit self refresh to a read commandExit precharge power down to any non-read command
Exit active power down to read commandExit active power down to read command(Slow exit, Lower power)CKE minimum pulse width(high and low pulse width)ODTturn-ondelayODT turn-on
ODT turn-on(Power-Down mode)ODT turn-off delayODT turn-off
ODT turn-off (Power-Down mode)ODT to power down entry latencyODT power down exit latencyOCD drive mode output delay
Minimum time clocks remains ON after CKE asynchronously drops LOW
tWTRtRTPtXSNRtXSRDtXPtXARDtXARDStCKEtAONDtAONtAONPDtAOFDtAOFtAOFPDtANPDtAXPDtOITtDelay
3
2tAC(min)tAC(min)+2
2.5
tAC(min)
3
2tAC(max)+12tCK+tAC(ma
x)+1
2.5
tAC(max)+ 0.6
2tAC(min)tAC(min)+2
2.5tAC(min)tAC(min)+2
38
tAC(max)+12tCK+tAC (max)+1
2.5
tAC(max)+ 0.6
tAC(min)+2
380tIS+tCK +tIH
2.5tCK+ tAC(max)+12.5tCK+ tAC(max)+1
120tIS+tCK +tIH