8850-1eng 电导率表说明书(3)

GF 8850电导率表说明书

ProcessPro Editing Procedure:

Step 1. Press and hold ENTER key:

2 seconds to select the CALIBRATE menu. 5 seconds to select the OPTIONS menu.

Step 2. The Key Code is UP-UP-UP-DOWN keys in sequence.

After entering the Key Code, the display will show the first item in the selected menu.

Step 3. Scroll menu with UP or DOWN arrow keys.

Step 4. Press RIGHT ARROW key to select menu item to be edited.

The first display element will begin flashing.

Step 5. Press UP or DOWN keys to edit the flashing element.

RIGHT ARROW key advances the flashing element.

Notes on Steps 5 and 6:

All output functions remain active during editing. Only the flashing element can be edited.

RIGHT ARROW key advances the flashing element in a continuous loop. Edited value is effective immediately after pressing ENTER key.

Step 6 (pressing ENTER key) always returns you to Step 3.

Repeat steps 3-6 until all editing is completed.

SIGNET 8850-1 Conductivity/Resistivity Transmitterpage 5 of 12