力士乐比例换向阀(15)

力士乐 比例换向阀

Dimensions size 25 (dimensions in mm)

1Main valve

2Pilot control valve

3Proportional solenoid "a"4Proportional solenoid "b"5Terminal box

6Plug screw for valves with one solenoid 7Name plate for pilot control valve 8Name plate for main valve

9Pressure reducing valve (always available)10Identical seal rings for ports P, A, B and T 11Identical seal rings for X and Y

12

Machined valve contact surface, porting pattern accord-ing to ISO 4401-08-08-0-05 (X, Y as required)13Locating pin

12

Required surface quality of the

valve contact surface

Subplates

G 151/01 FE/ZN (G1)

G 154/01 FE/ZN (G1 1/4) G 154/08 FE/ZN (flange)G 156/01 FE/ZN (G1 1/2)

with dimensions as in the data sheet 45058 must be or-dered separately.Valve mounting screws

For reasons of stability, exclusively use the following valve mounting screws:

6 hexagon socket head cap screws ISO 4762-M12x60-10.9-flZn-240h-L

(friction coefficient total: 0.09-0.14 according to VDA 235-101)(must be ordered separately)Important:

Subplates are no components in the sense of directive 94/9/EC and can be used after the manufacturer of the overall system has assessed the risk of ignition.

The G...FE/ZN versions are free from aluminum and/or mag-nesium and galvanized.