力士乐比例换向阀(13)

力士乐 比例换向阀

Dimensions size 10 (dimensions in mm)

1Main valve

2Pilot control valve

3Proportional solenoid "a"

4Proportional solenoid "b"

5Terminal box

6Plug screw for valves with one solenoid

7Name plate for pilot control valve

8Name plate for main valve

9Pressure reducing valve (always available)

10Identical seal rings for ports P, A, B, T and T1

11Identical seal rings for X and Y

12Machined valve contact surface, porting pattern ac-cording to ISO 4401-05-05-0-05 (X, Y as required, T1 is available at the valve and can optionally be provided)

Deviating from the standard:

- Locating pin not available Subplates

G 534/01 FE/ZN (G3/4) without ports X and Y

G 535/01 FE/ZN (G3/4) with ports X and Y

G 536/01 FE/ZN (G1) with ports X and Y

with dimensions as in the data sheet 45054 must be or-dered separately.

Valve mounting screws

For reasons of stability, exclusively use the following valve mounting screws:

4 hexagon socket head cap screws

ISO 4762-M6x45-10.9-flZn-240h-L

(friction coefficient total: 0.09-0.14 according to VDA 235-101) (must be ordered separately)

Important:

Subplates are no components in the sense of directive 94/9/EC and can be used after the manufacturer of the overall system has assessed the risk of ignition.

The G...FE/ZN versions are free from aluminum and/or mag-nesium and galvanized.