标准

Page 2

VW 105 14: 2002-11

The logo design shall on principle be specified in the drawing. If this specification is missing, design S shall be used.

Deviations from the necessity for identifying parts may be specified by the responsible design engineering department in consultation with 4-VO-4 (Original Part Product Definition), Quality Assurance and Standards Department.

Parts which cannot be identified due to design reasons, e.g. notch sensitivity (high notch stresses) or lack of space, are excluded from the identification requirement.

Volkswagen and Audi reserve the right for vehicle parts that bear logos to inspect the production facilities and to take random samples from ongoing part production.

In the case of lack of space the logo identification shall take precedence over the manufacturer's code (VW 105 40-1), the country of origin (VW 105 50), the part number, the date marking (VW 105 60) and the material designation (VDA 260).

The lettering/symbol size of the respective logos shall be as large as all other identifications on the part.

Differing brand logo identification of vehicle parts shall be determined as shown in table 1 according to their use in vehicles of the different brands.

Table 1 - Survey of in-house standards/data records for vehicle part identification Dimensions acc. to in-house standard(s), KVS (design data administration system) files

Volkswagen AG C (O) 1, 2 Table 2 (VW 105 10) Audi AG D 3 VW 105 13, KVS: LOG.000.004 Volkswagen AG and Audi AG A or B 4, 5 Table 2, VW 105 13 Seat S.A. F, J 7, 8 VW 105 17, KVS: 395.F01.130

395.F00.152

Auto Europa E 6 VW 105 20 SKODA AUTO a.s. M, R, N 9, 10,11 VW 105 22, KVS: LOG.000.008

LOG.000.007/ LOG.000.009

Volkswagen Group S 16 KVS: LOG.000.006 KVS: LOG.000.010 KVS: LOG.000.011 KVS: LOG.000.014 KVS: LOG.000.012 4

Volkswagen AG and Audi AG logos Brand name

Design

Picture

Vehicle parts which are used exclusively in the vehicles of the Volkswagen AG brand shall be identified with the logo according to design C, figure 1. If design C, Volkswagen sign with ring (dimensions d1 to d3), is not economically justifiable or cannot be executed for manufacturing reasons, layout O (without ring) as shown in figure 2 shall be used.1)

Vehicle parts which are used exclusively in the vehicles of the Audi AG brand shall be identified with the logo according to design D, figure 3.

If identical parts are used in vehicles of both the Volkswagen AG and the Audi AG, the parts shall be identified with the combined trademark according to design A, figure 4 or design B, figure 5. See VW 105 00 and the standards listed in table 1 for further design rules.

1)

Logo designs A and B shall be used on the lines of this specification.