Phase2_SIP_Explanation_Submission_Latest(9)

ipv6 ready 测试文档

3.4 Submission for Interoperability Test

3.4.1. Interoperability Test Result Table

Fill in the information of interoperability test results. Fill out the Result Table sheets included in Interoperability test Scenario document and submit it to us (You can use any formats for sending Result Table to us. For example, you can use txt format.). The directory structure for submission is described in subsection 3.5.

For information on how to fill out Result Table sheets, see the following.

-- Result Table

Fill out interoperability test results, as the examples at the end of Result Table

sheets. You can submit it only if all blanks are filled in “PASS”.

3.4.2. Topology Map

Fill in vender name, device name, topology map of UA /EP/B2BUA/PX/RG that is used in interoperability test.

Fill in the information of test topology in interoperability test. Fill out the Topology Map sheets included in Interoperability test Scenario document and submit it to us (You can use any formats for sending Topology Map to us. For example, you can use txt format.). The directory structure for submission is described in subsection 3.5.

For information on how to fill out Topology Map sheets, see the following.

Fill in the configuration of interoperability test as the examples in Topology Map sheets.

-- Topology Map

Fill in Interoperability test scenario Item number, vender name, device name,

topology map of UA / EP / B2BUA / PX / RG that is used in interoperability test.

-- IP address information

Fill in the prefix of each link and IP address / MAC address of UA / EP / B2BUA /

PX / RG / Router. Fill in the address of when you have executed interoperability test.