伟尔沃曼渣浆泵系列综合样本(4)

伟尔沃曼渣浆泵系列综合样本

services

The Warman® WBH® slurry pump range offers more than 20 enhancements to the already state-of-the-art Warman® AH® slurry pumping technology, including a fully adjustable and rotatable throatbush to more evenly spread the wear and maintain the pump in tip-top performance for longer periods.

Boasting a revolutionary one-piece frame for correct alignment of bearings, seal and impeller to front liner; as well as easier access for impeller adjustments, the WBH® pump was built with enhanced efficiency and operational savings in mind.

One-point adjustment allows for adjusting the throatbush both rotationally and axially while the pump is in operation, overcoming localized wear

One-piece bearing frame design ensures correct

alignment of bearings, seal and impeller New hydraulics were shown to increase efficiency and lower energy consumption by up to 12% in the pump trials at CSA, Australia, compared with Warman® AH® pump in same duty Large diameter expeller seals against high intake pressures without the need for gland seal water Quick and easy impeller gap adjustments to maximize performance without shutdown Fully lined design minimizes the risk of catastrophic failure with safety features including standard leak detection, optional vibration, temperature and wear monitoring, and the ability to add pressure relief and thermal cut-out devices Warman® Wear Reduction Technology (WRT®) throatbush and four-vane impeller design with vanelets for extended wear life and reduced NPSH requirements Large diameter shaft with short overhang combined with a robust and rigid one-piece bearing frame keeps the bearings aligned, which minimizes shaft deflection and vibration, as well as distortion from external piping loads The one-piece bearing frame ensures good

component alignment and concentricity through the seal area to reduce wear and extend seal life

The new Warman® WRT® throatbush and impeller combination is a superior

upgrade for your existing pump and is designed to enhance efficiency and improve wear performance

Warman® WBH®Warman® WRT®

5

伟尔沃曼渣浆泵系列综合样本

WARMAN®

Centrifugal Slurry Pumps

Warman® MCR /MC Metal/MCU

Severe duty lined pump designed for the most aggressive applications, such as mill circuit

The Warman® MC pump series is for the most aggressive wear applications. The Warman® MC pump easily manages large size particles in dense abrasive slurries and offers the right combination of ruggedness, durability, hydraulics and materials. From the most difficult mill discharge to water flushed crusher, the Warman® MC pump series is the best choice.

When paired with the Warman® AH® pump, virtually all the duties in your mill can be satisfied.

Ductile iron fully lined casing provides durability, strength, safety, and long service life Large diameter, slow turning, high efficiency

impellers designed to achieve maximum wear life and low operating costs Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs Unique, easily centered stuffing box reduces gland seal maintenance and extends packing life

Adjustable side liner maintains efficiency and extends service life (adjustable while running) Quick wet end exchange minimizes downtime Thick elastomer liners with alloy impellers provide superior wear life on the most difficult cyclone feed and screen feed services Interchangeable elastomer and alloy bolt-in liner offer ease of liner change-out and reduced maintenance costs Heavy duty construction with through-bolt

design provides ease of maintenance and minimal downtime Minimal shaft/impeller overhang reduces shaft deflection and increases packing life Cartridge-style bearing assembly allows for maintenance in a clean environment without

removal of the pump, resulting in reliable operation and prolonged bearing life Separate fully removable suction cover on Warman® 400 MCR pump facilitates access and replacement of the impeller, throatbush, and shaft sleeve without disturbing coverplate or discharge piping Left or right hand operation available

Warman® MCR /MC Metal/MCU

6

伟尔沃曼渣浆泵系列综合样本

WARMAN®

Centrifugal Slurry Pumps

Warman® HTP

Fully lined pump for severe multi-stage applications which offers numerous ease of maintenance features

The Warman® HTP pump range represents the highest pressure-rated, large, lined pumps available from Weir Minerals with priority given to increased safety, wear life, and reliability.

The Warman® HTP pump is rapidly establishing itself as the dominant pump in the Canadian oil sands, providing an efficient and durable solution to long distance hydro-transport and tailings duties.

Specifically designed hydraulics emphasize solid passing capability, head generation, wear life, and efficiency to deliver overall outstanding performance Multi-stage high pressure operation to 580 psi Major components designed with lifting points located with respect to center of gravity and specialized lifting tools enable rapid pump

maintenance and turnarounds

Ductile iron fully lined casing provides durability, strength, safety, and long service life Separate fully removable suction cover facilitates access and replacement of impeller, throatbush, and shaft sleeve without disturbing coverplate or discharge piping Unique, easily centered stuffing box reduces gland seal maintenance and extends packing l …… 此处隐藏：3820字，全部文档内容请下载后查看。喜欢就下载吧 ……