R03全环保碳性电池技术规格书(7)

钜大电池

Specification R03产品技术规格

ZH.S.1300

Number编号

Valid Date 生效日期 2010-8-13

Drafted by 编 制 Tuo Xian De陀先德 Approved 批 准 Huang Jian Hua黄建华

Note 2 注2: Free fall自由跌落 Note3 注3: Overdischarge过放电

10 Inspection rules检验规则

10.1 Deliver inspection: Depending on GB2828 交收检验: 依据GB2828 Table 4表4

Number 1 2 3 4

Test试验项目 Dimensions外形尺寸 Appearance外观 Discharge capacity放电容量 Open-circuit voltage开路电压

Item条款

5 -- 7 6

IL S-2 Ⅱ -- Ⅱ

AQL 0.4 1.0 -- 1.0

Routine inspection: Depending on GB2829例行检验: 依据GB2829

11 Inspection for service output

容量检验:

11.1 9 samples shall be tested for service output样品数为9只

11.2 If the average value is equal to or more than the value of table 1, and if the number

of batteries showing a value less than 80% of the value of table 1 is 1 or less. The batteries are considered to conform to the requirement. 当平均放电容量不低于表1所规定的标准值，且低于标准值80%的电池数不大于1时，判定电池容量合格。

11.3 If the average value is less than the value of table 1,or if the number of batteries showing

a value less than 80% is 2 or more, the test shall be repeated with other 9 pieces. At the second test, if the average value is equal to or more than the value of table 1,and if the number of batteries showing a value less than 80% of the value of table 1 is 1 or less, these batteries are considered to conform to the requirement. 当平均放电容量低于表1所规定的标准值，或低于标准值80%的电池数大于1 时，重新取9只样品进行试验，若平均放电容量不低于表1所规定的标准值，且低于标准值80%的电池数不大于1时，判定电池容量合格。