R03全环保碳性电池技术规格书(6)
时间:2026-01-16
时间:2026-01-16
钜大电池
Specification R03产品技术规格
ZH.S.1300
Number编号
Valid Date 生效日期 2010-8-13
Drafted by 编 制 Tuo Xian De陀先德 Approved 批 准 Huang Jian Hua黄建华
Drop each undischarged battery Two times,oriented in each of three mutually perpendicular face (six total) from a height 1 meter,onto a concrete
surface,see the following note
自由跌落
2未放过电的电池从1m高度跌落在混凝土表面上,每个被测电池应跌落6次,如注2所示在三个轴向上各两次,然后将被测电池放置1h
Discharge one test sample battery(C1) with 75Ωresistance load until EPV is 0.6V,Connect three undischarged batteries and the sample battery in series with a 15Ω resistance load(R1)as shown in note 3,Maintain the circuit until the CCV of the series string reaches 2.4V. 将一个未经放电的电池(C1)75Ω放电至EPV=0.6V,然后将该放过电的电池(C1)和3个来源相同但未放过电的电池及15Ω电阻(R1)按注3所示串联连接。接通回路至总的负荷电压降至2.4V。
n=5pcs
No explosion 不爆炸
Ac=0,Re=1
Overdischarge
过放电
n=5pcs
No explosion 不爆炸
Ac=0,Re=1
Note 1注1: Thermal shock气候-温度循环
-
下一篇:介词用法详解