FM8800S_D 7-15-05_学科文库

FM8800S_D 7-15-05

发布时间：2021-06-07

最新古野VHF

Simplex/Semi-duplex/Full-duplex, 25-Watt

MARINE VHF RADIOTELEPHONEwith a built-in Class A DSC and CH70 Watch Receiver

ModelsFM-8800S(Semi-duplex)

FM-8800D(Full-duplex)

●Fully meets ITU, IEC, ETSI, IMO forGMDSS and other national standards●Compact all-in-one unit design includesa 25-Watt radiotelephone, Class A DSCmodem and CH70 watch receiver●Superb voice quality by employing the lower-noise-designed speaker●Dual/multiple watch on selectedchannels while monitoring CH16●Quick access to CH16 key●Automatic entry of own ship position and time from a GPS navigator●Easy channel readout with large characters

●ATIS mode available for European inlandwaterways

●Connects to an office or home via anexisting PSTN (Public SwitchedTelephone Network)

●Simple interface with a printer and VDR(No need for a dedicated Junction Box)

The FURUNO FM-8800S/8800D are high quality, all-in-onemarine VHF radiotelephones designed to comply with theGMDSS carriage requirements for safety and general

communications. All the necessary functions such as a 25 WVHF radiotelephone, a Class A DSC modem and a CH 70Watch Receiver are incorporated into the compact transceiverunit.

The FM-8800S offers simplex/semi-duplex, the FM-8800Doffers simplex/full-duplex voice communications with superbvoice quality. For easy readout of a selected channel,

the silver-bright LCD on the front panel indicating the channelnumbers with large, easy-to-read characters.

The dedicated rotary control and numeric keys make selectingchannels easy. Other standard features are instant access toCH 16, telephone call via a PSTN, Dual Watch and MultipleWatch functions, which allow watch on CH 16 and otherselected channels.

Full Class A DSC functions are provided for distress alerttransmission and reception, as well as the general DSCcommunications including Individual Telephone, All Ships,Group and Area Call. The FM-8800S/8800D maintain acontinual watch on CH 70 even while you are using anotherVHF channel. Upon receiving an incoming DSC message, the FM-8800S/8800D give audible and visual alarms.ATIS (Automatic Transmitter Identification System) is standardfor use in European inland waterways. It automaticallytransmits the ID number when a communication is over orevery 5 min while in communication. The ATIS mode andDSC mode are selectable through the menu.

Both units have two types of handsets: a compact hand MICand a stylish handset. Up to four handsets can be additionallyconnected via an optional junction box . Each handset alsofunctions as an intercom for onboard communication.The compact transceiver unit allows a flexible and space-saving installation on a navigation console or the conningposition. Flush mount installation is also available.

Catalogue No. V-031

The future today with FURUNO's electronics technology.

FURUNO ELECTRIC CO., LTD.

9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp

TRADE MARK REGISTERED

MARCA REGISTRADA

最新古野VHF

SPECIFICATIONS OF FM-8800S/8800D

GENERAL CHARACTERISTICSRules and Regulations

VHF partsEN 301 925 V1.1.1(2002.09)VHF ATISEN 300 698-1 V1.2.1(2000.08)DSC partsEN 300 338 V1.2.1(1999-04)Class of EmissionG3E (telephone), G2B (DSC)Communication System

FM-8800SSimplex/Semi-duplexFM-8800DSimplex/Full-duplexChannels

All VHF channels according to ITU-R Radio Regulations AppendixS18, All channels in FCC Part 80, Max 20 Private channels wherepermitted by Administrations (preset by the service agent), 10weather channels (USA and Canada, receive only).Display

22 characters x 10 lines, character 7 x 11 dots, backlit LCDTRANSMITTERFrequency Range

FM-8800SSimplex/Semi-duplex:155.000 - 161.475 MHzFM-8800DSimplex/Full-duplex:155.000 - 158.000 MHzRF Output Power

25 W, reducible to 1 W

US version: CH13, 17, 67, 77 at 1 W, manual override for FULLFrequency Stabilityless than ±1.5 kHzTime-out Timer(For FCC)

Deactivates the transmitter after an uninterrupted transmission ofmore than 5 minutes

ATIS (Automatic Transmitter Identification System)

According to EN 300 698-1, an ATISsignal is transmitted every 5min or at the end of transmission, by modulating the carrier at1,300 and 2,100 HzRECEIVER

Frequency RangeFM-8800SSimplex:155.000 - 159.600 MHz

Semi-duplex:161.475 - 164.200 MHz

FM-8800DSimplex:155.000 - 158.000 MHz

Full-duplex:160.625 - 162.000 MHz

Receiving SystemDouble-conversion superheterodyne

IF: 51.2375 MHz and 37.5 kHz

AF Output Power3 W (4 loudspeaker)

2 mW (150 handset)

Audio ResponseDe-emphasis of 6 dB/oct +1/-3 dBSensitivityless than 6 dBµV at SINAD 20 dBAdjacent Channel Selectivity 70 dBDSC Section

Distress Call and Message

Distress call attempt is transmitted as five consecutive calls. It isrepeated after a random delay of between 3.5 and 4.5 min fromthe beginning of initial call until receiving the distressacknowledge call.Message LogReceive: 50 distress messages + 50 non-distress messagesTransmit: 50 messagesStorage100 filesInterfaceNav data: IEC 61162-1

Printer: Centronics

AlarmAudible and visual on receipt of a DSC call

(One dedicated output port also available)

Receiver CharacteristicsDSC frequency:CH70Calling sensitivity:Symbol error rate 10-2, input 0 dBµVWatch keeping:Continuous watch on CH70IF:38.3625 MHz and 37.5 kHz

FURUNO U.S.A., INC.

Camas, Washington, U.S.A.Phone: +1 360-834-9300Fax: +1 360-834-9400

POWER SUPPLY

FM-8800S: 24 VDC, 0.6 A (Standby), 1.6 A (RX), 4.7 A max. (TX)FM-8800D: 24 VDC, 0.6 A (Standby), 1.6 A (RX), 7.2 A max. (TX)ENVIRONMENT

Temperature (IEC 60529):-15°C to +55°CWaterproofing (IEC 60945):IPX4(Transceiver Unit/Hand Set)EQUIPMENT LISTStandard

1.Transceiver Unit FM-8800S/8800D1 unit2.Handset HS-2003 or Microphone DM-2003 1 unit

(Specify when ordering)3.Handset cradle FP05-055101 unit4.Installation materials and spare parts1 setOption

1.Whip Antennas for VHF and DSC with Coaxial Antenna Cable2.Extension Handset for wing (Dynamic/Carbon)

with Wing Receptacle OP05-57/OP05-583.Remote Station RB-8800/88104.Junction Box IF-8810

5.External Speaker SEM-21Q6.Printer PP-510

7.Interface Box IF-8820 for DMC-5

8.AC-DC Power Supply Unit PR-240-CE9.Flush Mount Kit OP05-102