HYM4V33100DTYG-75中文资料(6)

HYM4V33100DTYG Series

DC CHARACTERISTICS I (TA=0 to 70°C, VDD=3.3±0.3V)

Parameter

Input Leakage CurrentOutput Leakage CurrentOutput High VoltageOutput Low Voltage

ILIILOVOHVOL

Symbol

Min.-8-12.4-Max81-0.4

UnituAuAVV

Note12

IOH = -4mAIOL = +4mA

Note :

1.VIN = 0 to 3.6V, All other pins are not tested under VIN =0V2.DOUT is disabled, VOUT=0 to 3.6

DC CHARACTERISTICS II

Speed

Parameter

Symbol

Test Condition

-75

Operating Current

IDD1

Burst length=1, One bank active tRC ≥ tRC(min), IOL=0mACKE ≤ VIL(max), tCK = minCKE ≤ VIL(max), tCK = ∞

CKE ≥ VIH(min), CS ≥ VIH(min), tCK = minInput signals are changed one time during 2clks. All other pins ≥ VDD-0.2V or ≤ 0.2VCKE ≥ VIH(min), tCK = ∞Input signals are stable.CKE ≤ VIL(max), tCK = minCKE ≤ VIL(max), tCK = ∞

CKE ≥ VIH(min), CS ≥ VIH(min), tCK = minInput signals are changed one time during 2clks. All other pins ≥ VDD-0.2V or ≤ 0.2VCKE ≥ VIH(min), tCK = ∞Input signals are stable.tCK ≥ tCK(min), IOL=0mAAll banks active

tRRC ≥ tRRC(min), All banks activeCKE ≤ 0.2V

CL=3

2202

mA

2

mA

1

Unit

Note

Precharge Standby Current IDD2Pin Power Down Mode

IDD2PS

IDD2N

Precharge Standby Current in Non Power Down Mode

IDD2NS

Active Standby Current in Power Down Mode

IDD3PIDD3PS

40

mA

3060

mA

60

IDD3N

Active Standby Current in Non Power Down Mode

IDD3NS

Burst Mode Operating Current

Auto Refresh CurrentSelf Refresh Current

100

mA

60

IDD4IDD5IDD6

2202204

mAmAmA

123

Note :

1. IDD1 and IDD4 depend on output loading and cycle rates. Specified values are measured with the output open2. Min. of tRRC (Refresh RAS cycle time) is shown at AC CHARACTERISTICS II3.HYM4v33100DTYG-75