SPDT SUBMINIATURE POWER RELAY

FEATURES

Low cost

10 Amp switching

Epoxy sealed version availableUL, CUR file E44211

CONTACTS

ArrangementRatings

SPST-NOStandard coilSensitive coilSPDT

GENERAL DATA

SPST (1 Form A)SPDT (1 Form C)Resistive Load:

Max. switched power:150 W or 1250 VAMax. switched current: 5 ADC or 10 AAC Max. switched power:90 W or 750 VAMax. switched current: 3 A

Max. switched power:90 W or 750 VAMax. switched current: 3 A

Max. switched voltage: 150 VDC* or 380 VAC

* Note: If switching voltage is greater than 30VDC,

Life Expectancy

MechanicalElectricalOperate Time (typical)Release Time (typical)

Minimum operations1 x 107

1 x 105at 5 A250 VAC Res.8 ms at nominal coil voltage5 ms at nominal coil voltage(with no coil suppression)

Dielectric Strength2500 Vrms coil to contact

(at sea level for 1 min.)1000 Vrms between open contactsInsulationResistanceDropout

Ambient Temperature

Operating

Storage

VibrationShockEnclosureTerminals

Max. Solder Temp.Max. Solder TimeMax. Solvent Temp.Max. Immersion TimeWeight

1000 megohms min. at 20°C500 VDC 50% RH

Greater than 5% of nominal coil voltageAt nominal coil voltage

-40°C (-40°F) to 70°C (158°F) standard-40°C (-40°F) to 85°C (185°F) sensitive-40°C (-40°F) to 105°C (221°F)0.062" (1.5 mm) DA at 10–50 Hz10 g operating, 100 g damageP.B.T. polyester

Tinned copper alloy, P.C.270°C (518°F)5 seconds80°C (176°F)30 seconds6 grams

50 per plastic tray / 500 per carton box

special precautions must be taken.Please contact the factory

Rated LoadUL, CUR

Standard coil

Form A

10 A at 125 VAC, Res., 30k cycles5 A at 30 VDC / 250 VAC, 100k cycles

10 A LRA / 1.5 A FLA at 120 VAC, 100k cycles1/10HP at 125 VAC, 100k cycles1/HP at 250 VAC, 100k cycles6

5 A at 125 VAC, Res., 100k cycles 3 A at 30VDC / 250 VAC, 100k cyclesForm C

3 A at 30 VDC / 250 VAC, 100k cycles

Sensitive coil

MaterialResistance

Silver cadmium oxide< 100 milliohms initially

COIL

Power

At Pickup Voltage(typical)

Max. ContinuousDissipation

Temperature Rise(at nominal voltage)Temperature

253 mW standard coil113 mW sensitive coil1.25 W at 20°C (68°F) ambient41°C (74°F) standard coil22°C (40°F) sensitive coilMax. 130°C (266°F)

Packing unit in pcs

NOTES

1.All values at 20°C (68°F).

2.Relay may pull in with less than “Must Operate” value.3.Specifications subject to change without notice.

ZETTLER

electronics GmbH

2005-03-08

Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 office@http:// Fax +49 89 800 97 200 http://

RELAY ORDERING DATA

STANDARD RELAYS

COIL SPECIFICATIONS

Nominal Coil

VDC3

569121824

Must Operate

VDC2.25

3.754.56.759.013.518.0

Max. Continuous

VDC5.0

8.310.015.020.030.040.0

Coil ResistanceOhm ± 10%

20

55801803207201,280

ORDER NUMBER*

Form A (SPST)AZ767–1A–3DAZ767–1A–5DAZ767–1A–6DAZ767–1A–9DAZ767–1A–12DAZ767–1A–18DAZ767–1A–24D

Form C (SPDT)AZ767–1C–3DAZ767–1C–5DAZ767–1C–6DAZ767–1C–9DAZ767–1C–12DAZ767–1C–18DAZ767–1C–24D

SENSITIVE RELAYS

COIL SPECIFICATIONS

Nominal Coil

VDC3

569121824

Must Operate

VDC2.25

3.754.56.759.013.518.0

Max. Continuous

VDC7.5

12.515.022.430.044.759.2

Coil ResistanceOhm ± 10%

45

1251804007201,6002,800

ORDER NUMBER*

Form A (SPST)AZ767–1A–3DSAZ767–1A–5DSAZ767–1A–6DSAZ767–1A–9DSAZ767–1A–12DSAZ767–1A–18DSAZ767–1A–24DS

* Add suffix “E” for epoxy sealed version.

ZETTLER

electronics GmbH

2005-03-08

Tel. +49 89 800 97 0 office@http:// Junkersstrasse 3, D-82178 Puchheim, Germany

Fax +49 89 800 97 200 http://