SmartPlant3D_SP3D软件_设备建模练习2

SmartPlant 3D Equipment Modeling Student Workbook

Version 2007 January 2007

Copyright

Copyright © 2007 Intergraph Corporation. All Rights Reserved.

Including software, file formats, and audiovisual displays; may be used pursuant to applicable software license agreement; contains confidential and proprietary information of Intergraph and/or third parties which is protected by copyright law, trade secret law, and international treaty, and may not be provided or otherwise made available without proper authorization.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Contractor Rights in Technical Data clause at DFARS 252.227-7013, subparagraph (b) of the Rights in Computer Software or Computer Software Documentation clause at DFARS 252.227-7014, subparagraphs (b)(1) and (2) of the License clause at DFARS 252.227-7015, or subparagraphs (c) (1) and (2) of Commercial Computer Software---Restricted Rights at 48 CFR 52.227-19, as applicable.

Unpublished---rights reserved under the copyright laws of the United States.

Intergraph Corporation

Huntsville, Alabama 35894-0001

Warranties and Liabilities

All warranties given by Intergraph Corporation about equipment or software are set forth in your purchase contract, and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such warranties. Intergraph believes the information in this publication is accurate as of its publication date.

The information and the software discussed in this document are subject to change without notice and are subject to applicable technical product descriptions. Intergraph Corporation is not responsible for any error that may appear in this document.

The software discussed in this document is furnished under a license and may be used or copied only in accordance with the terms of this license.

No responsibility is assumed by Intergraph for the use or reliability of software on equipment that is not supplied by Intergraph or its affiliated companies. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINAL EVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT. Trademarks

Intergraph, the Intergraph logo, SmartSketch, FrameWorks, SmartPlant, INtools, MARIAN, and PDS are registered trademarks of Intergraph Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. MicroStation is a registered trademark of Bentley Systems, Inc. ISOGEN is a registered trademark of Alias Limited. Other brands and product names are trademarks of their respective owners.

Table of Contents Table of Contents

LAB-1: Placing Equipment from the Catalog (4)

LAB-2: Placing Equipment With Mate RelationShip (10)

LAB-3: Rotating Equipment While Placing / After Placement (12)

LAB-4: Placing Equipment Using Different Coordinate System (15)

LAB-5: Placing Equipment Using PG and Properties Page Error! Bookmark not defined.

LAB-6: Equipment Modifications (20)

LAB-7: Placing Equipment Using Copy/Paste...........Error! Bookmark not defined.

LAB-8: Placing Shapes to Build Designed Equipment (24)

LAB-9: Adding Nozzles to Designed Equipment / Shapes (31)

LAB-10: Adding Nozzles using By Point Option......Error! Bookmark not defined.

LAB-11: Placing Equipment from External modeler (36)

LAB-12: Placing Shapes to model a Vertical Vessel as Designed Equipment – (OPTIONAL LAB)...........................................................................Error! Bookmark not defined.

LAB-13: Placing Equipment from PID (48)

LAB-14: Inserting Control Points..............................Error! Bookmark not defined.

SmartPlant 3D Equipment Modeling Student Workbook 3

Equipment Labs LAB-1: Placing Equipment Using Properties

Page(Process equipment)

Objective

After completing this lab, you will be able to:

• Place equipment from catalog, with specified name

• Define correct parent system folder using property page

• Position and orient equipment while in placement mode using properties page

• Modify equipment dimensions while in placement mode using properties page

1Open a Session file with Imperial Units

Note: Session file stores settings from the last time you were in SmartPlant 3D.

The name of the current session file appears in the title bar of the application,

along with the name of the task, model and filter. One of the settings saved in the

session file is the workspace. See the common labs on how to define a workspace 2Define Workspace to Display U03 and U03 CS

3If you are not in the Equipment task, then select Task -> Equipment and

Furnishing

4Make sure the Active Permission Group is set to Equipment.

Note: Objects that you place directly in the model are assigned to the active

permission group. Therefore, you are responsible of making sure the equipment is

assigned to the appropriate Permission Group.

4SmartPlant 3D Equipment Modeling Student Workbook

Equipment Labs 5Activate PinPoint by Selecting Tools > PinPoint (make sure active Coordinate

system is Global)

6Select Place Equipment Command

7Expand the Equipment Folder\Process Equipment\Vertical Vessels\Simple Vertical Vessel with Skirt folder until you see the part SWWSE210-E. Select the part and click the OK button.

8Equipment Property page is displayed on your screen

9Key in T-101 for Name

10Click in the System Field and select ‘More…’

SmartPlant 3D Equipment Modeling Student Workbook 5

Equipment Labs

Note: Objects that you place directly in the model are associated to a system in

the System Hierarchy. Therefore, you are resp …… 此处隐藏：8521字，全部文档内容请下载后查看。喜欢就下载吧 ……