砌体结构Ansys命令流(12)
时间:2025-07-07
时间:2025-07-07
砌体结构整体式建模,ansys命令流
cnvtol,f,,0.1,2,0.5
allsel
lswrite,5
!*--------------------------------6th step-------------------------------------- nsel,s,loc,x,-0.24
ddele,all,ux
nsel,s,loc,x,3.36
d,all,ux,-2.85E-4
allsel,all
!*
OUTRES,ERASE
OUTRES,ALL,ALL
NSUBST,200,2000,30
neqit,15
NROPT ,FULL,,OFF
KBC,0
nlgeom,1
cnvtol,f,,0.1,2,0.5
allsel
lswrite,6
!*--------------------------------7th step-------------------------------------- nsel,s,loc,x,3.36
ddele,all,ux
nsel,s,loc,x,-0.24
d,all,ux,2.85E-4
allsel,all
!*
OUTRES,ERASE
OUTRES,ALL,ALL
NSUBST,200,2000,30
neqit,15
NROPT ,FULL,,OFF
KBC,0
nlgeom,1
cnvtol,f,,0.1,2,0.5
allsel
lswrite,7
!*------------------------------------two cycle---------------------------------
!*----------------------------初裂荷载80%做1次循环------------------------------ !*---------------------------------用NR法--------------------------------------- !*---------------------------------8th step------------------------------------- nsel,s,loc,x,-0.24
ddele,all,ux
nsel,s,loc,x,-0.24
上一篇:1.3等高线和地形剖面图 (2)
下一篇:特约黄金和澳大利亚货币通胀幻觉