CAPILLARY PART NUMBER SYSTEMHOW TO ORDER

Example Custom Part Number:J. Optional ConeAngle

I. OR DimensionA. Shank StyleB. Capillary SeriesC. Hole Size

D. Tool Length

E. Tip Finish

A. & B. Shank Style & Capillary Series:1800 (18XX): 1/16 inch diameter shank, standardAlumina ceramic or specify -CZ1 for ZirconiaToughened Alumina ceramic, Process 18001500 (15XX): 1/16 inch diameter shank, standardAlumina ceramic or specify -CZ1

for ZirconiaToughened Alumina ceramic1200 (12XX): 1/8 inch diameter shank, standardAlumina ceramic1100 (11XX): 1/16 inch diameter shank, TungstenCarbide material

C. Hole Size (H):恒凯Example Standard Part Number:A. Shank StyleC. Hole SizeH. Face AngleG. IC DimensionF. Tip DiameterB. Capillary SeriesD. Tool Length

E. Tip Finish

J. Optional Cone Angle

G. Inside Chamfer Dimension (IC):X = 0.000X4 = 0.0004 in./10µmSpecify Based on Wire Size-XX = 0.00XX-18 = 0.0018 in./46µm-375 = 0.375 in./9.52mm-437 = 0.437 in./11.1mm-470 = 0.470 in./11.94mm-625 = 0.625 in./15.88mm-750 = 0.750 in./19.05mm1200 series are 0.375 in./9.52mm only (do notspecify length in part number)D. Tool Length:H. Face Angle:-XD = X°-8D = 8°

E. Tip Finish:

P = PolishedGM = Gaiser MatteI. Outside Radius Dimension (OR):-XX = 0.00XX-10 = 0.0010 in./25µmF. Tip Diameter (T):-XX = 0.00XX-50 = 0.0050 in./127µmJ. Optional Cone Angle:-XXD = XX°-20D = 20°Cone angle is 30° unless otherwise specified 深圳恒凯光电科技有限公司　　　地址：深圳宝安区龙华镇

电话：０７５５－２８０９９９７０传真：０７５５－６１３５１６８４