MAX6329SHUT+T中文资料

General Description The MAX6329/MAX6349 are low-dropout, micropower

linear voltage regulators with integrated microproces-sor reset circuits. Each is available with preset +3.3V,+2.5V, +1.8V, or adjustable output voltages and can deliver up to 150mA load current. Employing internal P-

channel MOSFET pass transistors, the devices con-sume only 25µA supply current, independent of the device load. The low supply current, low dropout volt-

age, and integrated reset functionality make these devices ideal for battery powered portable equipment.The MAX6329/MAX6349 include an internal reset circuit that indicates when the regulator output drops below

standard microprocessor supply tolerances (-5% or -10%). The reset output remains asserted for 100ms (min) after the regulator output exceeds the selected

reset threshold, ensuring that supply voltages and clock oscillators have stabilized before processor activity is enabled. Reset outputs are available in push-pull (active-low or -high) and open-drain (active-low) options. The

internal reset circuit replaces external microprocessor supervisors or RC-based reset time delays.The MAX6329/MAX6349 are optimized for use with a 1µF (min) output capacitor. The regulator output volt-

age is adjustable with an external resistor-divider net-work at SET (reset threshold voltages track the desired

output voltage). Each device includes thermal shut-down protection, output short-circuit protection, and

reverse leakage protection. The MAX6329 includes a shutdown feature to reduce regulator current below 1µA (max) and the MAX6349 offers a manual reset input to assert a microprocessor reset while the regula-tor output is within specification.________________________Applications Hand-Held Instruments Electronic Planners Palm Top Computers PCMCIA Cards USB Devices Cellular Telephones

Cordless Telephones Modems

Features

o Preset +3.3V/+2.5V/+1.8V or Adjustable Regulator Output

o ±3.0% Regulator Accuracy Over the Specifed Operating Range

o 25µA Supply Current

o Low 180mV Dropout at 100mA Load

o Small Output Capacitor (1µF min ceramic or tantalum)

o Zero Reverse Leakage Current

o Thermal and Short-Circuit Protection

o Integrated Microprocessor Reset Circuit with 100ms (min) Timeout

o Open-Drain and Push-Pull Reset Outputs o Regulator Shutdown Input (MAX6329) or Manual Reset Input (MAX6349)

o 6-Pin SOT23 Package

MAX6329/MAX6349150mA, SOT23, Low-Dropout Linear Regulators with Internal Microprocessor Reset Circuit

________________________________________________________________Maxim Integrated Products 1

Pin Configuration 19-1889; Rev 3; 3/04

Ordering Information

These parts offer a choice of regulator/reset voltages and reset outputs. From the Selector Guide, insert the desired suffix let-ters into the blanks to complete the part number. Each device is available in nine standard versions. Sample stock is general-

ly held on standard versions only (see Standard Versions

table). Standard versions have an order increment requirement

of 2500 pieces. Nonstandard versions have an order increment

requirement of 10,000 pieces. Contact factory for availability of nonstandard versions.

Typical Operating Circuit appears at end of data sheet.

Selector Guide appears at end of data sheet.For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 1-888-629-4642, or visit Maxim’s website at http://www.77cn.com.cn.元器件交易网http://www.77cn.com.cn

M A X 6329/M A X 6349

150mA, SOT23, Low Dropout Linear Regulators with Internal Microprocessor Reset Circuit 2_______________________________________________________________________________________

ABSOLUTE MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

IN to GND.................................................................-0.3V to +7V SHDN to GND...........................................................-0.3V to +7V SET to GND..............................................-0.3V to (V OUT + 0.3V)MR to GND...............................................................-0.3V to +7V RESET, RESET to GND, (Push-Pull)..........0.3V to (V OUT + 0.3V)RESET to GNd,(Open-Drain).....................-0.3V to (V OUT +0.3V)OUT to GND.............................................................-0.3V to +7V Short-Circuit Duration.................................................Continuous Maximum Current into Any Pin (except IN, OUT) ............±20mA

Continuous Power Dissipation (T A = +70°C)

6-Pin SOT23 (derate 7.1mW/°C above +70°C).............571mW Thermal Resistance (θJA )............................................+140°C/W Operating Temperature Range...............................0°C to +85°C Junction Temperature......................................................+150°C Storage Temperature Range.............................-65°C to +150°C Lead Temperature (soldering, 10s).................................+300°C

元器件交易网http://www.77cn.com.cn

MAX6329/MAX6349150mA, SOT23, Low Dropout Linear Regulators with Internal Microprocessor Reset Circuit _______________________________________________________________________________________3

Note 2:Specification from 0°C to less than 25°C is guaranteed to four sigma only.

Note 3:Dropout voltage is defined as V IN - V OUT when V …… 此处隐藏：16566字，全部文档内容请下载后查看。喜欢就下载吧 ……