硅胶件公差标准 ISO3302-1,M2

硅胶键标准

8

STANDARD TOLERANCES ON ACTUATION FORCES & DIMENSIONS8-1 Tolerance on Actuation Force (cN): ≤ 50Normal Critical ±20 ±15

≤80±30 ±20

≤100±35 ±25

≤120±40 ±30

≤150±45 ±35

≤180±50 ±35

≤210±50 ±40

≤250±50 ±40

>250±20% ±15%

8-2 Tolerances on Dimensions (mm) according to Standard DIN ISO3302-1, Class M2:≤4.0 F C ±0.10 ±0.15 ≤6.3 ±0.15 ±0.20 ≤10 ±0.20 ±0.20 ≤16 ±0.20 ±0.25 ≤25 ±0.25 ±0.35 ≤40 ±0.35 ±0.40 ≤63 ±0.40 ±0.50 ≤100 ±0.50 ±0.70 ≤160 ±0.70 ±0.80 >160 ±0.5% ±0.7%

F = tool bound dimensions C = dimensions depending on tool closure Note: Dimensional Tolerance of German Standard DIN 16901 for plastics mouldings

9 10 11

DIMENSION INSPECTION REPORT – See Attached Sheets FUNCTIONAL TEST REPORT– See Attached Force and Travel Diagram PACKING AND MARKING10-1 Packing: As principle, one unit, consisting of the same products shall be put into one polyethylene bag. For outer packing, the corrugated cardboard case shall be applied, so as not to suffer from any external influence on the performance and visual view. 10-2 Marking: each packing unit must be marked with the following items. A. Polyethylene bag 1) Product name 2) Quantity contained 3) Responsible inspector 4) Inspection date The above are subject to the instruction given by customer on the actual label of example.

12

INDUSTRIAL PROPERTYIn case products and/or components which are manufactured in accordance with this specification and supplied to your company cause any industrial property conflicts with their designing and/or production, the conflicts will be resolved together with customer and our company.

13

CONCLUSION