英文的

Tutorial Lesson 3 – Analysis

** Now let’s go ahead and learn how to create an analysis on the model we just setup. **

ANALYSIS Menu: #Mechanica Analyses/Studies…

ANALYSES AND DESIGN STUDIES Dialog Box: #File, #New Static…

** This will bring up the Analysis Definition Dialog Box. Here is where we define many of the attributes of the analysis such as which constraints to use, what loads to include, and how to converge on the results. For a static analysis you must have at least one constraint set and one load set. You can also have multiple sets defined for different loading conditions and can set these up to run all as one analysis or separate. **

英文的

** Click on the Output tab and increase the plotting grid to 6. The plotting grid is a factor of how dense your result calculations will be. The higher the number the more times Mechanica will calculate results along an element edge. The higher the number the longer Mechanica will take to calculate the results so keep this to somewhere between 4 and 6 for initial calculations. You may increase this as needed later on. Click on OK when you are done. **

STATIC ANALYSIS DEFINITION Dialog Box: #Output Tab, Plotting Grid: 6, #OK

** Now it is time to run the first analysis. Let’s go ahead and run this one. **

英文的

ANALYSES AND DESIGN STUDIES Dialog Box: #Run, #Start

QUESTION Dialog Box: #Yes

** The analysis will now begin to run. Depending upon the complexity of your analysis, this can run fairly quickly or it can take a long time. This analysis is fairly simple so the run time should be within a minute or two. Once complete, the Diagnostics dialog box will appear and display the status of the run. **

DIAGNOSTICS ANALYSIS ANALYSIS1 Dialog Box: #Close

ANALYSES AND DESIGN STUDIES Dialog Box:

** Now let’s take a look at some of the results of this analysis. Clicking on the Review Results Icon will automatically launch a separate window for results viewing. In addition, this will pre-load the initial analysis into your Results Window Definition. **

(Review Results Icon)

英文的

** The definition window will then appear. Fill this out like the one shown above. Von Mises stress is a preferred method of evaluating stress that will lead to a yielding condition.

RESULT WINDOW DEFINITION Dialog Box: Title: [von Mises Stress of Bracket], #Display

Options Tab, #Continuous Tone, Legend Levels: [8], #OK

** Now create another result window, this will be a displacement result. Fill this out as shown in the following figure. **

UNTITLED Window:

DESIGN STUDY Dialog Box: Select Analysis 1, #Open

英文的

RESULT WINDOW DEFINITION Dialog Box: Title: [Displacement Animation], #Quantity

Tab, #Displacement, #Display Options Tab, #Continuous Tone, Legend Levels: [8],

#Deformed, #Animate, Frames: [32], Uncheck #Auto Start, #OK

** Now we can view the results next to each other. **

UNTITLED Window:

(Display Definition Icon)

** Select the two result windows that you want to display. Here you can select both of them. Then click on the OK button to show the following results. **