8055 power FL-M的最新操作手册

All rights reserved. No part of this documentation may be transmitted,

transcribed, stored in a backup device or translated into another language

without Fagor Automation’s consent. Unauthorized copying or distributing of this

software is prohibited.

The information described in this manual may be changed due to technical

modifications. Fagor Automation reserves the right to make any changes to the

contents of this manual without prior notice.

All the trade marks appearing in the manual belong to the corresponding owners.

The use of these marks by third parties for their own purpose could violate the

rights of the owners. It is possible that CNC can execute more functions than those described in itsassociated documentation; however, Fagor Automation does not guarantee thevalidity of those applications. Therefore, except under the express permissionfrom Fagor Automation, any CNC application that is not described in thedocumentation must be considered as "impossible". In any case, FagorAutomation shall not be held responsible for any personal injuries or physicaldamage caused or suffered by the CNC if it is used in any way other than asexplained in the related documentation.The content of this manual and its validity for the product described here has beenverified. Even so, involuntary errors are possible, thus no absolute match isguaranteed. Anyway, the contents of the manual is periodically checked makingand including the necessary corrections in a future edition. We appreciate yoursuggestions for improvement.The examples described in this manual are for learning purposes. Before usingthem in industrial applications, they must be properly adapted making sure that

the safety regulations are fully met.

This product uses the following source code, subject to the terms of the GPL license. The applications busybox V0.60.2;

dosfstools V2.9; linux-ftpd V0.17; ppp V2.4.0; utelnet V0.1.1. The librarygrx V2.4.4. The linux kernel V2.4.4. The linux boot

ppcboot V1.1.3. If you would like to have a CD copy of this source code sent to you, send 10 Euros to Fagor Automationfor shipping and handling.