allie allke等

Total energy output quantities

If the following whole model variables are relevant for a particular analysis, you can request them as output to the data, results, or output database file (see “Total energy output” in “Output to the data and results files,” Section 4.1.2, and “Total energy output” in “Output to the output database,” Section 4.1.3). If you do not specify an output region, whole model variables are calculated. When you specify an output region, the relevant energy totals are calculated over the user-specified region.

These variables are not available for eigenvalue buckling prediction, eigenfrequency extraction, or complex frequency extraction analysis. You cannot specify an output region for modal dynamic, random response, response spectrum, or steady-state dynamic analysis.

See “Energy balance,” Section 1.5.5 of the Abaqus Theory Manual, for details of the energy definitions.

ALLAE

“Artificial” strain energy associated with constraints used to remove singular modes (such as hourglass control), and with constraints used to make the drill rotation follow the in-plane rotation of the shell elements. .dat: automatic .fil: automatic .odb Field: no .odb History: yes

ALLCD

Energy dissipated by creep, swelling, and viscoelasticity.

.dat: automatic .fil: automatic .odb Field: no .odb History: yes

ALLEE

Electrostatic energy.

.dat: automatic .fil: automatic .odb Field: no .odb History: yes

ALLFD

Total energy dissipated through frictional effects. (Available only for the whole model.)

.dat: automatic .fil: automatic .odb Field: no .odb History: yes

ALLIE