履带板宽 1000 mm

履带接地长度 2920 mm

密封和润滑履带▲

该履带的节距、履带板数、履带板宽与普通的履带相同。

Inner and outer beam of track roller frame are rectangular section “八”frame .Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal.

Number of track rollers:

Singe flange 4

Double flange 2

Number of carrier roller 2 on each side

Number of idler (each side) 1

Track type : triangle section, modular type Track adjuster type : by hydraulically adjust

Pitch: 203 mm

Number of shoes(each side) 42 pieces

Width of shoe 1000 mm

Length of track on ground 2920 mm

Sealed and lubricated track ▲

The pitch , numbers and width of track shoes are the same with the general track.

工作装置液压系统

Implement hydraulic system

由装置油泵、液压油箱及各种阀、油缸、滤油器和管路组成。

油泵型式 齿轮油泵

油泵流量 190 L/min

系统压力 11.76 MPa

单阀可实现铲刀油缸提升、封闭、下降和浮动。

It is composed of implement pump , hydraulic tank and various valves , cylinders , filters and lines .

Pump model gears oil pump

System output 190L/min

System pressure 11.76Mpa

Single valve control: it can complete the “raise, hold ,lower and float” of the blader cylinder.

底盘液压系统