ACS800

10

24 VDC power input (X34)

Voltage: 24 VDC ±10%

Typical current consumption (without option modules): 250 mA

Maximum current consumption: 1200 mA (with option modules inserted)Pin designations: 1 = not used; 2 = +24 V; 3 = 0 V

Control panel connection (X39)

General: For connection of CDP-312R control panel

PPCS link (V57, V68)

General: Optical fibre connection to inverter (or IGBT supply) module

Optical component type: 10 MBd

Protocol: ABB PPCS (Power Plate Communication System)

Jumper J1

General: See Isolation and grounding below

Pitch: 2.54 mm

LEDs

“Power”: Green; denotes +5 V power OK

“Fault”: Red

Ambient conditions

Operating temperature: +0 … +60 °C (32…140 °F)

Storage temperature: -40 … +70 °C (-40 … +158 °F)

Applicable standards

Immunity: IEC 61800-3 (Limits: Industrial, Second environment); EN 50081-2 (Limits: Industrial)

Emission: EN 50081-2 (Limits: Industrial)

PELV requirements: The terminals of the RMIO board as well as on the optional modules attachable to the board fulfil the Protective Extra Low Voltage (PELV)

requirements stated in EN 50178 provided that the external circuits connected to the terminals also fulfil the requirements.

RDCU-02(C) Control Unit Hardware Manual