TEG1286403C图形点阵液晶显示模块使用说明书

时间:2025-07-10

TEG1286403C图形点阵液晶显示模块使用说明书

深 圳 市 通 美 科 技 有 限 公 司

SHENZHEN TONMEE TECHNOLOGY CO.,LTD. SHENZHEN TONMEE TECHNOLOGY CO.,LTD.

Specifications for Approval Specifications for Approval

Customer ustomer : : Model NameModel Name Name :TEG1TEG1286403C286403C Description:LIQUID CRYSTAL DISPLAY MODULE

DESIGN CHECK APPROVED DESIGN CHECK APPROVED

TEG1286403C图形点阵液晶显示模块使用说明书

Rev. Rev. 00 00

Change Descriptions Descriptions

ORIGINAL VERSION

Date Date 20102010-10-04-06

TEG1286403C图形点阵液晶显示模块使用说明书

Table of Content

1. Basic Specifications --------------------------------------------------------- 3 1.1 Display Specifications ------------------------------------------- 3

1.2 Block Diagram ---------------------------------------------------- 3 2. Mechanical Dimensions ---------------------------------------------------- 4 3. Interface Pin Connection --------------------------------------------------- 5 4. Absolute Maximum Ratings ----------------------------------------------- 6 5. Electrical Characteristics --------------------------------------------------- 6

5.1 DC Characteristics ----------------------------------------------- 6 5.2 LED Backlight Circuit Characteristics ------------------------ 6 5.3 AC Characteristics ----------------------------------------------- 7 6. Function Specification ------------------------------------------------------ 8

6.1 Operating Principles & Metheds-------------------------------- 8 6.2 Display Control Instruction description------------------------- 8 7. Example ---------------------------------------------------------------------- 12

7.1 Application Circuit ---------------------------------------------- 12 7.2 Programme ------------------------------------------------------- 12 8. Design And Handling Precaution ----------------------------------------- 17

TEG1286403C图形点阵液晶显示模块使用说明书

1. Basic Specifications

1.1 Display Specifications

1) LCD Display Mode : 2) Display Graphic : Dots

3) LCD Driving Methood : 4) Viewing Angle : 5) Module Dimension : 6) Effective Display Area : 7) Dot Size

: 8) Dot Pitch : 9) Back Light Type :

1.2 Block Diagram

TEG1286403C图形点阵液晶显示模块使用说明书

2. Mechanical Dimensions

TEG1286403C图形点阵液晶显示模块使用说明书

3. Interface Pin Connection

Pin NO.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 17 18 18

Symbol

CS1 CS1

CS2 CS2 VSS VSS VDD VDD V0 V0 RS RS R/W R/W E DB0DB0 DB1DB1 DB2DB2 DB3DB3 DB4DB4 DB5DB5 DB6DB6 DB7 DB7 BLA BLA BLKBLK

Level

L

L L H -- -- H/LH/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L 5.0V 5.0V 0V 0V

Ground For Logic

Function

Chip Select for Left,Active at Low

Chip Select for Right,Active at Low Supply voltage for logic Supply voltage for LCD

Data/Instruction Register Select R/W=H:Read;R/W=L:Write Enable Signal Data bus Data bus Data bus Data bus Data bus Data bus Data bus Data bus

LED Backlight Power Supply(5.0) LED Backlight Power Supply(0V)

TEG1286403C图形点阵液晶显示模块使用说明书

4. Absolute Maximum Ratings

Items Symbol Min Max Unit Condition Supply Voltage VDD -0.3 7.0 V VSS=0V Input Voltage VIN -0.3 VDD+0.3 V VSS=0V Operating Temperature TOP -20 70 ℃ No Condensation Storage Temperrature TST -30 80 ℃ No Condensation

5. Electrical Characteristics

5.1 DC Characteristics

Condition: VDD=+5.0V±10%, Ta=-30 to +85℃

Items

Symbol Min Type Max Unit Condition

Supply voltage for logic VDD 4.5 5.0 5.5 V Supply voltage for LCD VDD-V0 -- 11.5 19.0 V Input High Voltage 0.8VDD -- -- VIH V Input Low Voltage -- - 0.2VDD VIL V

Output High Voltage 0.8VDD -- -- VOH V IOH=-200uA Output Low Voltage -- -- 0.2VDD IOL=1.6mA VOL V

5.2 LED Backlight Circuit Characteristics

Items Symbol Min Type Max Unit Condition Forward Voltage VfBLA -- 5.0 5.5 V Forward Current IfBLA -- 60 120 mA Luminance Lv -- 220 -- Cd/㎡ Example:

TEG1286403C图形点阵液晶显示模块使用说明书

5.3 AC Characteristics

Characteristic

E Cycle E Rise E Fall

E High Level Width E-Low Level Width Address Set –Up Time Address Hold Time Data Delay Time Data Set –Up Time

Data Hold Time ( Write) Data Hold Time (Read)

Symbol tC tR tF tWH tWL tASU tAH tD tDSU tDHW tDHR

Min 1000 - - 450 450 140 10 - 200 10 20

Typ

- - - - - - - - - - -

Max - 25 25 - - - - 320 - - -

Unit ns ns ns ns ns ns ns ns ns ns ns

System Bus Read/Write Characteristics VDD=+5.0V±10%, VSS=0V, Ta=25℃

READ/WRITE TIMING FOR THE PORT MPU

TEG1286403C图形点阵液晶显示模块使用说明书

6. Function Specification

6.1 OPERATING PRINCIPLES & METHODS

6.10 I/O Buffer

Input buffer controls the status between the enable the and disable of chip. Unless the CS1 to CS2 is in active mode. Input or output of data and instruction does not execute. Therefore internal stade is not change.

Bust RSTB and ADC can operate regardless CS1-CS2. 6.11 Input register

Input register is provided to interface with MPU which is different operating frequency. I …… 此处隐藏:12341字,全部文档内容请下载后查看。喜欢就下载吧 ……

TEG1286403C图形点阵液晶显示模块使用说明书.doc 将本文的Word文档下载到电脑

    精彩图片

    热门精选

    大家正在看

    × 游客快捷下载通道(下载后可以自由复制和排版)

    限时特价:7 元/份 原价:20元

    支付方式:

    开通VIP包月会员 特价:29元/月

    注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
    微信:fanwen365 QQ:370150219