FPM10AL 指纹识别模块例程

volatile unsigned char UART1_FINGERPRINT_RECEVICE_BUFFER[24];

//FINGERPRINT通信协议定义

unsigned char FP_Pack_Head[6] = {0xEF,0x01,0xFF,0xFF,0xFF,0xFF}; //协议包头

unsigned char FP_Get_Img[6] = {0x01,0x00,0x03,0x01,0x0,0x05}; //获得指纹图像 unsigned char FP_Templete_Num[6] ={0x01,0x00,0x03,0x1D,0x00,0x21 }; //获得模版总数

unsigned char FP_Search[11]={0x01,0x0,0x08,0x04,0x01,0x0,0x0,0x03,0xA1,0x0,0xB2}; //搜索指纹搜索范围0 - 929

unsigned char FP_Search_0_9[11]={0x01,0x0,0x08,0x04,0x01,0x0,0x0,0x0,0x13,0x0,0x21}; //搜索0-9号指纹

unsigned char FP_Img_To_Buffer1[7]={0x01,0x0,0x04,0x02,0x01,0x0,0x08}; //将图像放入到BUFFER1

unsigned char FP_Img_To_Buffer2[7]={0x01,0x0,0x04,0x02,0x02,0x0,0x09}; //将图像放入到BUFFER2

unsigned char FP_Reg_Model[6]={0x01,0x0,0x03,0x05,0x0,0x09}; //将BUFFER1跟BUFFER2合成特征模版

unsigned char FP_Delet_All_Model[6]={0x01,0x0,0x03,0x0d,0x00,0x11};//删除指纹模块里所有的模版

volatile unsigned char FP_Save_Finger[9]={0x01,0x00,0x06,0x06,0x01,0x00,0x0B,0x00,0x19};//将BUFFER1中的特征码存放到指定的位置

volatile unsigned char FP_Delete_Model[10]={0x01,0x00,0x07,0x0C,0x0,0x0,0x0,0x1,0x0,0x0}; //删除指定的模版

//volatile unsigned char FINGER_NUM;

/*------------------ FINGERPRINT命令字 --------------------------*/

//FINGERPRINT_获得指纹图像命令

void FINGERPRINT_Cmd_Get_Img(void)

{

unsigned char i;

for(i=0;i<6;i++) //发送包头

UART1_Send_Byte(FP_Pack_Head[i]);

for(i=0;i<6;i++) //发送命令 0x1d

UART1_Send_Byte(FP_Get_Img[i]);

}

//讲图像转换成特征码存放在Buffer1中

void FINGERPRINT_Cmd_Img_To_Buffer1(void)