FT-7800说明书!

时间：扫描将停在发现的一个信号频率上5秒钟。如果在这5秒钟内没有任何动作取消扫描 操作，本机将无条件继续扫描其他信号。

HOLD: The scanner will stop when a signal is received, and will not restart.

锁定：扫描将停在发现的一个信号频率上，不再继续扫描操作。

Menu #38 [SCN MD]

菜单#38[SCN MD]

Function: Selects the Memory Scan channel-selection mode.

功能：选择频道扫描模式

Available Values: MEM/ONLY

选项：MEM / ONLY

Default: MEM

默认值：MEM

MEM: The scanner will “skip” the flagged channels during scanning.

MEM：扫描所有频道（已经做标记的频道将被跳过，不做扫描）

ONLY: The scanner will only scan channels that are flagged (Preferential Scan List).

ONLY：扫描所有已经被标记的频道（即扫描优先扫描列表中的频道）

Menu #39 [SHIFT]

菜单#39[SHIFT]

Function: Sets the magnitude of the Repeater Shift.

功能：设置差频数值

Available Values: 0.00 - 99.95 MHz (50 kHz step)

选项：0.00到99.95MHz（以50kHz为步进值）

Default: Depends on the band of operation.

默认值：各个频道的默认值不同

Menu #40 [SKIP]

菜单#40[SKIP]

Function: Selects what action will happen on a “flagged” Memory Channel

功能：设置遇到已经做标记的频道时如何操作

Available Values: OFF/SKIP/ONLY

选项：关闭 / 跳过 / 仅限

Default: OFF

默认值：关闭

OFF: All memory channels will be scanned (the “flag” will be ignored).

关闭：所有频道都将被扫描（已经做的标记被忽略）

SKIP: The scanner will “skip” the flagged (“SKIP”) channels during scanning.