天线开关芯片——UPG2214(EN)
时间:2025-07-15
时间:2025-07-15
UPG221芯片的英文资料,详细说明了其工作原理和其应用。
SWITCH CONTROL VOLTAGE: Vcont (H) = 1.8 to 5.3 V (3.0 V TYP.) Vcont (L) = 0.2 to +0.2 V (0 V TYP.)
NEC's UPG2214TB is a GaAs MMIC L, S-band SPDT (Single Pole Double Throw) switch for mobile phones and other L, S-band applications from 0.05 to 3.0 GHz.
This device can operate from 1.8 to 5.3 V with low insertion loss and high isolation. Performance is speci ed at both1.8 V and 3.0 V.
The UPG2214TB is housed in a 6-pin super minimold package suitable for high-density surface mounting.
LOW INSERTION LOSS:
0.25 dB TYP. @ 0.05 to 0.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
0.25 dB TYP. @ 0.5 to 1.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V 0.30 dB TYP. @ 1.0 to 2.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V 0.35 dB TYP. @ 2.0 to 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V 0.35 dB TYP. @ 2.5 to 3.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V HIGH ISOLATION:
32 dB TYP. @ 0.05 to 0.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V 28 dB TYP. @ 0.5 to 1.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V 27 dB TYP. @ 1.0 to 2.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V 26 dB TYP. @ 2.0 to 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V 24 dB TYP. @ 2.5 to 3.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V POWER HANDLING:
L, S-band digital cellular and cordless telephones BluetoothTM , W-LAN, and WLL Short Range Wireless
Pin (1 dB) = +27.0 dBm TYP. @ 0.5 to 3.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
Pin (1 dB) = +20.0 dBm TYP. @ 0.5 to 3.0 GHz, Vcont (H) = 1.8 V, Vcont (L) = 0 V HIGH-DENSITY SURFACE MOUNTING:
6-pin super minimold package (2.0 × 1.25 × 0.9 mm) Pb FREE
ORDERING INFORMATION
Part NumberUPG2214TB-E4-A
Package
6-pin super minimold
MarkingG4J
Supplying Form
Embossed tape 8 mm wide
Pin 4, 5, 6 face the perforation side of the tape Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales of ce.
Part number for sample order: UPG2214TB-A
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
UPG221芯片的英文资料,详细说明了其工作原理和其应用。
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
(Top View)
123
615243
(Top View)
665544
(Bottom View)
123
PIN NO.
123456
PIN NAMEOUTPUT1GNDOUTPUT2Vcont2INPUTVcont1
TRUTH TABLE
Vcont1LowHigh
Vcont2HighLow
INPUT-OUTPUT1
ONOFF
INPUT-OUTPUT2
OFFON
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise speci ed)
PARAMETER
Switch Control VoltageInput Power
Operating Ambient TemperatureStorage Temperature
SYMBOLVcontPinTATstg
RATINGS+6.0 Note+30 45 to +85 55 to +150
UNITVdBm°C°C
Note |Vcont1-Vcont2| ≤ 6.0 V
RECOMMENDED OPERATING RANGE (TA = 25°C, unless otherwise speci ed)
Parameter
Switch Control Voltage (H)Switch Control Voltage (L)
SymbolVcont(H)Vcont(L)
MIN.1.8 0.2
TYP.3.00
MAX.5.30.2
UnitVV
G4J
UPG221芯片的英文资料,详细说明了其工作原理和其应用。
UPG2214TB
ELECTRICAL CHARACTERISTICS
PARAMETER
Insertion Loss 1Insertion Loss 2Insertion Loss 3Insertion Loss 4Insertion Loss 5Isolation 1Isolation 2Isolation 3Isolation 4Isolation 5
Input Return Loss 1Input Return Loss 2Output Return Loss 1Output Return Loss 20.1 dB Loss Compression Input Power Note 2
1 dB Loss Compression Input Power Note 32nd Harmonics3rd Harmonics
Intermodulation Intercept PointSwitch Control CurrentSwitch Control Speed
SYMBOLLins1Lins2Lins3Lins4Lins5ISL1ISL2ISL3ISL4ISL5RLin1RLin2RLout1RLout2Pin (0.1 dB)Pin (1 dB)2f03f0IIP3IconttSW
50% CTL to 90/10% RF
(TA = +25°C, Vcont (H) = 3.0, Vcont (L) = 0 V, DC blocking capacitors value = 100 pF, unless otherwise speci ed)
TEST CONDITIONS
f = 0.05 to 0.5 GHz Note 1f = 0.5 to 1.0 GHzf = 1.0 to 2.0 GHzf = 2.0 to 2.5 GHzf = 2.5 to 3.0 GHzf = 0.05 to 0.5 GHz Note 1f = 0.5 to 1.0 GHzf = 1.0 to 2.0 GHzf = 2.0 to 2.5 GHzf = 2.5 to 3.0 GHzf = 0.05 to 0.5 GHz Note 1f = 0.5 to 3.0 GHzf = 0.05 to 0.5 GHz Note 1f = 0.5 to 3.0 GHzf = 2.0/2.5 GHzf = 0.5 to 3.0 GHzf = 0.5 to 3.0 GHz
f = 2.0 GHz, Pin = +15 dBmf = 2.5 GHz, Pin = +15 dBmf = 2.0 GHz, Pin = +15 dBmf = 2.5 GHz, Pin = +15 dBmf = 0.5 to 3.0 GHz, 2 tone, Pin = +16 dBm, 5 MHz spicing
MIN. 292524232115151515+21.0
TYP.0.250.250.300.350.35322827262420202020+23.0+23.0+27.0 55 55 55 55+58420
MAX.0.450.450.500.550.60 47 47 47 47 20200
UNITdBdBdBdBdBdBdBdBdBdBdBdBdBdBdBmdBmdBmdBcdBcdBcdBcdBmμAns
Notes 1. DC blocking capacitors = 1,000 pF at f = 0.05 to 0.5 GHz
2. Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear range.
3. Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of linear range.
UPG221芯片的英文资料,详细说明了其工作原理和其应用。
UPG2214TB
ELECTRICAL CHARACTERISTICS
PARAMETER
Insertion Loss 6Insertion Loss 7Insertion Loss 8Insertion Loss 9Insertion Loss 10Isolation 6Isolation 7Isolation 8Isolation 9
Input Return Loss 3Output Return Loss 30.1 dB Loss CompressionInput Power Note 2
1 dB Loss Compression Input Power Note 3Switch Control CurrentSwitch Control Speed
Pin (1 dB)IconttSW
50% CTL to 90/10% RF
SYMBOLLins6Lins7Lins8Lins9Lins10ISL6ISL7ISL8ISL9RLin3RLout3Pin (0.1 dB)
(TA = +25°C, Vcont (H) = 1.8, Vcont (L) = 0 V, DC blocking capacitors value = 100 pF, unless otherwise speci ed)
TEST CONDITIONS
f = 0.05 to 0.5 GHz Note 1f = 0.5 to 1.0 GHzf = 1.0 to …… 此处隐藏:7656字,全部文档内容请下载后查看。喜欢就下载吧 ……
上一篇:浅谈高校大学生就业现状及对策