ASTM F963-08 最新中文标准

时间:2025-07-08

最新的ASTM F963-08 最新中文标准

ASTM F963-08 updatesApril 2, 2009

最新的ASTM F963-08 最新中文标准

Confidentiality“Copyright 2009 Bureau VeritasConsumer Products Services, Inc.” “Proprietary to Bureau Veritas Consumer Products Services, Inc.”“DO NOT DISCLOSE OUTSIDE YOUR ORGANIZATION WITHOUT BUREAU VERITAS PRIOR WRITTEN CONSENT” 版权所有 未经BV书面许可, 未经BV书面许可,不得对外传播 BV书面许可Bureau Veritas Consumer Products Services2

最新的ASTM F963-08 最新中文标准

Summary1. Sound Producing Toys 发声玩具 2. Folding Mechanisms and Hinges 折叠装置和铰链 3. Toy Chest 玩具箱 4. Certain Toys with Spherical Ends 带有球形末端的玩具 5. Yo Yo Elastic Tether toys 弹绳摇摇玩具 6. Magnets 磁铁 7. Jaw Entrapment in handles and steering Wheels下颌卡在手柄和转向轮8. Flammability Testing Procedures for Solids and Soft Toys固体和柔软玩具燃烧测试过程9. Flammability Testing Procedure for fabrics 纺织品燃烧测试过程Bureau Veritas Consumer Products Services3

最新的ASTM F963-08 最新中文标准

Sound Producing Toys 发声玩具 Delete requirements 删除的要求Section 4.5.1.2 Exempts push/pull toys from the Continuous Sounds requirements for the pass-by test 豁免拖拉玩具连续声音测试要求. 试要求 Adds to the Measurements of Impulsive Sounds 增加了脉冲声音测试要求 增加了脉冲声音测试要求. the pass-by tests, measure the Cweighted peak sound pressure level. Measured twice on each side 拖拉玩具测试C-权计声压,每边测试两次.Bureau Veritas Consumer Products Services4

最新的ASTM F963-08 最新中文标准

Folding Mechanisms and Hinges折叠装置和铰链 折叠装置和铰链 Revisescope 范围修改Section 4.13 Folding mechanisms and hinges 折叠装置和铰链 The statement, “intended to support the weight of child”, has been deleted from the scope to clarify that this is not applicable to the entire Section 4.13 . 旧的范围“设计意图为承受儿童重量 已经删除,不再适用于新的 旧的范围 设计意图为承受儿童重量”已经删除 不再适用于新的4.13的要求 的要求. 设计意图为承受儿童重量 已经删除 不再适用于新的 的要求 Do not relate to the recognized and familiar hazards associated with the changing clearances around the edges of doors or pivoted or hinged sections in toy truck bodies, toy earth moving machinery, and similar toys. 此要求不适用于一些公认的在玩具车 地球仪等 此要求不适用于一些公认的在玩具车, 玩具车 类似玩具的插销或铰链位置的变化空隙 的插销或铰链位置的变化空隙. 类似玩具的插销或铰链位置的变化空隙 Section 4.13.1 Folding Mechanisms折叠装置 折叠装置 Folding mechanisms is applicable to toy products intended or likely to support the weight of a child . 折叠装置的要求适用于设计意图是或者很可能为承受儿童重量的玩具 Section 4.13.2 Hinge Line Clearance铰链间隙 铰链间隙 Hinge-Line Clearance is applicable to all toy products that contain a hinge, provided the movable portion weighs greater than ½ lb. and the accessible gap at the hinge line is within the range of 3/16 inch through ½ inch. 铰链间隙的要求适用于所有含有铰链,活动部件的重量超过1/2 lb,并且可触及 铰链线间隙在3/16 inch和 ½ inch之间.Bureau Veritas Consumer Products Services5

最新的ASTM F963-08 最新中文标准

Folding Mechanisms and Hinges折叠装置和铰链 折叠装置和铰链Section 4.13.1 Folding mechanisms 折叠装置 Examples of products to which these requirements would apply include, but are not limited to 此要求适用于如下类别的玩具, 但并不局限于此: 此要求适用于如下类别的玩具 但并不局限于此 Folding mechanisms in toy strollers a child can sit in 儿童可能坐入的含有折叠装置的玩具推车 Toy chairs a child can sit in 儿童可能坐入的玩具椅 Child sized ironing board 儿童尺寸的烫衣板 Determine if a child can sit in product 决定是否儿童能 坐入 Verify that seat width would accommodate the hip breadth of a child in the age range for which the product is intended. 通过比较不同年龄级别儿童臀部宽度与玩具座位宽度来确定 Examples of products to which these requirements would not apply include, but are not limited to 此要求可以豁免的产品包括但不局限于如下类别,: 此要求可以豁免的产品包括但不局限于如下类别 a doll house-sized chair 玩偶尺寸的座椅 a doll house-sized bed 玩偶尺寸的床 an expandable/collapsible sphere 弹力伸缩球Bureau Veritas Consumer Products Services6

最新的ASTM F963-08 最新中文标准

Folding Mechanisms and HingesAge (years) 2-3 4 5 6 7 8 9 10 11 12 13 14 5th (cm) 17.1 17.8 18.6 19.1 19.8 21.1 21.6 22.5 23.2 23.9 25.1 26.6Data of hip breadth 臀部宽度数据 Data according to US Anthropometry of Infants, Children, and Youths to Age 18 for Product Safety Design. For reference only (美国人体测量学数据,仅供参考)Bureau Veritas Consumer Products Services7

最新的ASTM F963-08 最新中文标准

Folding Mechanisms and Hinges折叠装置和铰链 折叠装置和铰链 New Requirement 新的要求Section 4.13.1.1 Locking devices 锁定装置 Locking devices or other means to prevent unexpected or sudden movement or collapse of the article shall engage automatically when the product is placed in the manufacturer’s recommended use position 当按照生产商说明打 开产品的时候, 锁定装置或者其他阻止玩具突然倒塌的装置, 应当自动锁上 自动锁上. 开产品的时候 锁定装置或者其他阻止玩具突然倒塌的装置 应当 …… 此处隐藏:8720字,全部文档内容请下载后查看。喜欢就下载吧 ……

ASTM F963-08 最新中文标准.doc 将本文的Word文档下载到电脑

    精彩图片

    热门精选

    大家正在看

    × 游客快捷下载通道(下载后可以自由复制和排版)

    限时特价:7 元/份 原价:20元

    支付方式:

    开通VIP包月会员 特价:29元/月

    注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
    微信:fanwen365 QQ:370150219