CATIA汽车管路设计
时间:2025-02-24
时间:2025-02-24
CATIA TrainingFoils
Tubing Design 管路设计Version 5 Release 13 2004
Copyright DASSAULT SYSTEMES 2002
Course Presentation课程介绍 课程介绍Objectives of the course目标 目标In this course you will learn how the CATIA Tubing Design product is used to quickly and efficiently create an intelligent tubing layout.
智能化管路设计
Targeted audienceExperienced CATIA V5 users
目标学员 有使用经验的CATIA用户 有使用经验的 用户0.5 day
PrerequisitesCATIA V5 Fundamentals 予要求: 予要求:CATIA V5基础 基础
Copyright DASSAULT SYSTEMES 2002
Table of Contents目录 目录1. Introduction to Tubing Design FundamentalsAccessing the workbench模块介绍 模块介绍 User Interface: Tubing Design Icons界面介绍 界面介绍
p.4p.5 p.6
2. 3. 4. 5. 6. 7.
Creating Line ID’s生成管线 码 生成管线ID码 生成管线 Routing a Run生成管线 生成管线 Modifying a Run修改管线 修改管线 Implementing Turn Rules管路拐弯 管路拐弯 Placing Parts on a Run 管路定义功能 Generating Reports 生成管路拐点坐标
p.9 p.10 p.14 p.19 p.22 p.24
Copyright DASSAULT SYSTEMES 2002
Accessing the workbench进入模块 进入模块To access the Tubing Design Workbench …进入模块Tubing Design Workbench icon
1. Select the Start Menu
选择Start菜单
图标
2. Select Equipment & Systems
选择设备和系统方案3. Click on Tubing Design
选择管路设计模块
Copyright DASSAULT SYSTEMES 2002
User Interface: Tubing Design Icons (1/2)Line ID: Select/Query, Create, Transfer, Rename, Delete, Merge, Import管路 码编辑 管路ID码编辑 管路 Route a Run生成管路 生成管路 Offset Route, Route from Spline, Route thru a pathway偏距管路等 pathway偏距管路等 Place Tubing Part插入接头 Part插入接头 Update Part, Flip Part Position, Edit Part Parameters刷新功能、参数 Parameters刷新功能 刷新功能、 Connect/Disconnect Part/Run, Create an offset segment con.连接 Manage grafic representation几何显示 representation几何显示 Manage flows流量管理 flows流量管理 Create weld assembly管路焊接 assembly管路焊接 Build Tubing Part新建功能 Part新建功能 Align Side, Align Center, Rotate to Align, Distribute, Align two Planes移动 移动 Snap, Snap three points, Snap center of polygon, snap Surface捕捉 Surface捕捉 Rename ID重新命名 重新命名ID 重新命名
Copyright DASSAULT SYSTEMES 2002
User Interface: Tubing Design Icons (2/2)Snap Tool Options捕捉工具 捕捉工具 To current Axis当前坐标轴 当前坐标轴 To last Position最后位置 最后位置 Snap: To XY Plane XY面 面 To all Plane所有平面 所有平面 To Elevation Plane抬高平面 抬高平面 To Drafting Elements平面元素 平面元素
坐标轴 Axis 生成平面Offset Planes
Grid Step
网格距离 显示模式
Toggle Dimming Mode Toggle Analysis Mode
Advanced Offset Planes
Copyright DASSAULT SYSTEMES 2002
Routing a Run (1/4)生成管路 生成管路 Place Offset Plane生成起始面 Select the Offset Plane Icon选择图标 Offset Planes can be placed at anytime during the creation of Runs.此图标可以在生成管路时随时使用 此图标可以在生成管路时随时使用
Offset Plane
图标
Copyright DASSAULT SYSTEMES 2002
Routing a Run (2/4)生成管路 生成管路Select the Line ID选择管线ID码Depending on what Line ID is choosen, CATIA lets you select a predefined Turn Radius. In this case is just one Turn Radius for the 3/8in diameter defined, which means that you won´t get a selection panel.根据选择的管线ID码,可以选择拐弯半径 t panel.根据选择的
Copyright DASSAULT SYSTEMES 2002
Routing a Run (3/4)生成管路 生成管路Create the Run生成管路 生成管路Make sure that the Grid Step is set to 0.5 in. 确认步长为 确认步长为0.5inPoint-To-Point-Mode
Route a Run
图标
当绿箭头出现时点击鼠标
Click when the green arrow pops up. Stop when the value reaches 2in.
当到达一定长度时停
Copyright DASSAULT SYSTEMES 2002
Routing a Run (4/4)生成管路 生成管路Create a Run from Point-To-Point点到点方式生成管路 点到点方式生成管路Click the the next two connectors. The Run will be created.点击两个支座,生成管路 created.点击两个支座 点击两个支座,
Copyright DASSAULT SYSTEMES 2002
Modifying a Run (1/5)修改管路 修改管路Modify the Run修改管路 修改管路A new Run shall be created and afterwards being modified.先生成后修改 modified.先生成后修改 Therefore you create a new Run using the orthogonal mode as shown in the picture.使用对角线方式生成管路 使用对角线方式生成管路 After that you will modify the Run.然后修改 然后修改
Route a Run
Orthogonal
生成管路
对角线方式
Create the Run
产生管路
Copyright DASSAULT SYSTEMES 2002
Modifying a Run (2/5)修改管路 修改管路 Modify the Run修改管路Runs can be edited by right clicking and choosing Runxxx.object – Definition in the contextual menu. You will see the skeleton of the Run, that consists of Segments, . Nodes and Manipulation Handles.在管路上右击鼠标选择 在管路上右击鼠标选择Definition菜单,将显示管路骨 菜单, 在管路上右击鼠标选择 菜单 包括分段、 架,包括分段、节点和操纵柄 Segments can be stretched by dragging the green vertexes at the end of each segment.其中的分段可以通过鼠标拖拉端点而改变长度 其中的分段可以通过鼠标拖拉端点而改变长度Manipulation Handles Node Segment Alignment of the Run
分段 节点 管路导向 操纵柄
Copyright DASSAULT SYSTEME …… 此处隐藏:6771字,全部文档内容请下载后查看。喜欢就下载吧 ……
下一篇:乡镇基层党组织建设调研报告